Panasonic CF-25LJF8EAM/E Operating Instructions Manual page 20

When you want to prevent theft of or damage to data by using a floppy disk
When you do not want your Supervisor Setup changed without permission
In the Setup Utility (
if "Enter Supervisor Password" is
displayed,
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
You may choose to protect the data on your computer from being accessed illegally or overwrit-
ten accidentally by using a floppy disk. You can also set your computer to be unbootable from
a floppy disk.
Preventing the use of a floppy disk
Even when one tries to access a
floppy disk,
P r o c e d u r e
1
Run the Setup Utility
2
Using and
3
Using and
FDD] or [CDD
C A U T I O N
When changing to the [HDD
continue read/write operations from a floppy disk and to use the hard disk drive or
CD-ROM to start, press
4
Using the
with , then press
5
Close the Setup Utility
Set the Supervisor Password. After it has been set, no changes can be made to the Supervisor
settings unless the password is entered.
When the supervisor password is set
Input the correct supervisor password and press
page 40),
When the supervisor password is incorrect or when the
user password is entered, (Or, even when the correct su-
pervisor password is entered).
N O T E
You may wish to protect the User Password (
( page 40)
, select [Supervisor Setup], then press
, select [Boot Up Drive], then set either [HDD
FDD HDD] with
FDD] or [CDD
and go to step
and , select [Floppy Operation], set [Disable]
( page 40)
page 32
page 20).
This error message is displayed.
FDD HDD] setting, to
.
5
Supervisor Setup
,
May be
O p e n e d
Supervisor Setup
Can not be
O p e n e d
(There are cases in which the Supervisor Setup
does not appear on the main screen). page 40
1 9