Panasonic CF-25LJF8EAM/E Operating Instructions Manual page 12

Power Switch
Do not touch the
power switch while
your computer is en-
tering the hiberna-
tion mode.
Hibernation Mode
Power Switch
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Using the hibernation function
It is necessary to set the hibernation function using the Setup Utility.
1
Run the Setup Utility
2
Using and
3
Using and
with , then press
4
Close the Setup Utility
C A U T I O N
Save all data before powering off your computer.
When restarting from or shutting down to the suspend or hibernation mode, do
not touch the touch pad or move the mouse (serial or PS/2 type) if one is con-
nected. There are cases where these devices will fail to operate; you will have to
restart your computer using the keyboard (
Do not power off during the following periods (you may corrupt your data or
file):
• While the Multimedia pocket indicator (
• While playing/recording audio files.
• While communications software is being used.
Do not use the suspend or hibernation function when using an OS other than
Windows 95, the diagnostics program (DIAG25), or the Setup Utility, or when
experiencing static electricity or noise.
If you hold down on the
tion mode, after resuming operation, you must press the same key. For example,
if you hold down on the
ing, if you do not press the
typing.
If your computer locks up, press the reset button. All data is lost when this
button is pressed.
In the suspend mode, power is consumed. If PC cards (e.g., modem card) are
inserted, more of that power is consumed. When all power has been consumed,
all data at shutdown is lost since it is retained in memory. We therefore recom-
mend plugging in the AC adapter when using the suspend function.
When the file in the external devices such as a CD-ROM drive, external hard
disk, or ATA cards is opened, the suspend or hibernation function may not work.
In such cases, close the file.
SCSI cards may not recover to work after entering the suspend or hibernation
mode. If this occurs, restart the computer.
R e s u m i n g O p e r a t i o n
If security indicator (
been set ( page 8).
C A U T I O N
Do not install or remove peripherals while your computer is in the suspend or hiber-
nation mode; abnormal operation may result.
When operation resumes, serial devices such as a mouse or modem, or your PC Cards
may not work. In such cases, you will need to restart your computer or reinitialize the
individual devices.
( page 40)
, select [Power Management], then press
, select [Power Switch], set [Hibernation]
( page 40)
, or
key while sliding the power switch, upon resum-
key again, only capital letters will result from
) is displayed upon sliding the power switch, your password has
page 10).
) or HDD indicator ( ) is on.
key to enter the suspend or hiberna-
1 1