Table of Contents
Advertisement
Pin 2: enables fixed-setting of the TX Port 1 by moving
up to the ON position; activates auto-negotiation in the
OFF setting. Pin 2 must be in the ON position in order to
change port settings with pins 3 and 4.
Pin 3: forces 10Mbps speed on port 1 when in the ON
position; forces 100Mbps speed on port 1 when in the
OFF position. Note: new setting will not be activated
unless fixed-setting is enabled.
Pin 4: forces half-duplex on port 1 when in the ON
position; full-duplex in the OFF position. Note: new
setting will not be activated unless fixed-setting is
enabled.
Fiber Port
Setting
1
Half duplex
Full
duplex
Table 1: DIP switch settings defined
8
User's Manual
Port 1 Settings
2
3
Enable
10
Half
Fixed
Mbps
duplex
Settings
Auto-
100
Full
negotiation
Mbps
duplex
4
Advertisement
Table of Contents
