Connection­and­preparation; Connecting The Antenna; Connecting External Data Media (Socket B) - Grundig 22GFB5620 Manual

CONNECTION­AND­PREPARATION
Connecting­the­antenna­(socket­A)
1 To receive digital satellite channels (DVB-S), connect the
satellite antenna cable to the a ntenna socket
LITE« on the television set.
2a To receive terrestrial digital broadcasters (DVB-T) connect
the cable for the rooftop or indoor antenna (passive or
active indoor antenna with its own power supply) to the
»
antenna socket ANT­IN
or
2b To receive digital
connect the cable for the rooftop antenna
to the antenna socket
or
2c To receive analogue TV channels, connect the cable for
the rooftop antenna to the antenna socket
the television set
Note:
When connecting an indoor antenna you may have to
7
try it out at different positions until you get the best re-
ception.
»SATEL-
«
on the television set;
cable channels
» «
ANT­IN on the t elevision set;
»
ANT­IN
1 2
A
Connecting­external­data­media
(socket­B)
1
Connect the
responding socket of the data medium (external hard
disk) using a USB cable;
Notes:
Before removing the external data medium, the television
7
must be switched to standby, so that no data loss occurs.
If you use a network cable for external hard
7
disks
» «
USB
(DVB-C)
also be disconnected from the power supply when the tele-
vision is switched off.
External data media may not be disconnected from the
7
television while files on the data medium are being ac-
cessed.
«
on
­ - ----------------------------------------------
B C D
» «
USB
socket of the t elevision and the cor-
which have been connected
socket of the television, this network cable must
to the
5­
ENGLISH