Craftsman 917.272068 Owner's Manual page 28

ACCELERATION TEST-
6. Move throttle control lever from slow to
fast position. If engine hesitates or dies,
turn idle fuel adjusting needle out
(counterclockwise) 1/8 turn. Repeat test
and continue to adjust, if necessary, until
engine accelerates smoothly.
High speed stop is factory adjusted. Do
not adjust - damage may result.
IMPORTANT: Never tamper with the
engine governor, which is factory set for
proper engine speed. Overspeeding the
engine above the factory high speed
setting can be dangerous. If you think the
engine-govemed high speed needs
adjusting, contact a Sears or other qualified
sewice center, which has proper equip-
ment and experience to make any
necessary adjustments.
Cable "_
Clamp -_.
Screw
_ _
Speed Control
Bracket'-_
Thr _tt|E
)ver
Idle Speed
Adjusting_ /
Sorew
Idle Fuel I_ __------_1
Adjusting _ I _ I--clr_.l I
.eed,e
28