Parkside PMGS 12 D3 Translation Of The Original Instructions page 13

Application examples/selecting a suitable tool
Function
Drilling
Milling
Engraving
Polishing, rust removal
CAUTION!
Exert only a light pres-
sure when applying the
tool to the workpiece.
Cleaning
Grinding
Cutting
■ Note that the maximum diameter of the grinding assembly and of grinding cones and pencil grinders
with a thread insert may not exceed 55 mm and the maximum diameter for sandpaper sanding acces-
sories may not exceed 80 mm.
NOTE
► The max. permissible length of a mandrel is 33 mm.
■ Store the accessories in the original box or store the accessory components somewhere else to protect
them from damage.
■ Store the accessories somewhere dry and not in the vicinity of aggressive media.
│ GB │ IE │ NI
■ 10
Accessories
HSS drills
Milling bits
Engraving bits
Metal brush
Polishing discs
Synthetic brushes
Grinding discs
Grinding bits
Cutting discs metal
Use
Working wood
Various jobs; e.g.
creating recesses,
hollows, forms,
grooves or slits
Labelling, handicraft
Rust removal
Various metals and
plastics, especially
precious metals such
as gold and silver
e.g. cleaning hard-
to-access plastic
housings or the area
around a door lock
Grinding work on
stone, wood, fine
work on hard materials
such as ceramics or
alloyed steel
Working metal,
plastic and wood
Protrusion
(min–max) mm
18–25, using the
smallest drill, the
protrusion is 10 mm
18–25
18–25
9–15
12–18
9–15
12–18
10
12–18
PMGS 12 D3