Table of Contents
Advertisement
5. Replacing the lamp
Replacing the lamp
Danger of Life!
Danger of Life!
Seat in the lamp only when the power is off. Unplug the power cord!
Seat in the lamp only when the power is off. Unplug the power cord!
Seat in the lamp only when the power is off. Unplug the power cord!
Attention!
If the lamp is damaged or has lamp deformed by heat, it should be replaced
If the lamp is damaged or has lamp deformed by heat, it should be replaced
If the lamp is damaged or has lamp deformed by heat, it should be replaced
immediately.
Unplug the unit completely from the mains before you change a lamp. To do this, unplug the power
Unplug the unit completely from the
cord. Allow the lamp to cool before changing necessarily. This takes approximately 5 minutes.
cord. Allow the lamp to cool before changing necessarily. This takes approximately 5 minutes.
cord. Allow the lamp to cool before changing necessarily. This takes approximately 5 minutes.
Do not touch the glass body with your bare hands. Notes the lamp manufacturer should also be strict
Do not touch the glass body with your bare hands. Notes the lamp manufacturer should also be strict
Do not touch the glass body with your bare hands. Notes the lamp manufacturer should also be strictly
observed.
No lamps may be used with a higher power rating in the device. For lamps with higher performance
No lamps may be used with a higher power rating in the device. For lamps with higher performance
No lamps may be used with a higher power rating in the device. For lamps with higher performance
arise during operation higher temperatures, for which the equipment was not designed. Non
arise during operation higher temperatures, for which the equipment was not designed. Non
arise during operation higher temperatures, for which the equipment was not designed. Non-
compliance will invalidate the warranty.
compliance will invalidate the warranty.
This spotlight is optimal for 230 volt.
t is optimal for 230 volt. Application up to max. 300 W.
Do not turn on the device before you have not closed the housing cover!
Do not turn on the device before you have not closed the housing cover!
Do not turn on the device before you have not closed the housing cover!
6. Technical data
Power supply
Energy efficiency
Power consumption max.
Light source
LM type
Socket
Connections
Power in
Hardware
Protection class
Suitability
Dimension (L/B/H)
Material
Weight
mains before you change a lamp. To do this, unplug the power
A++ up to F
300 W
Halogen
GX16D
Schutzko
IP20
Indoor
280 x 210 x 230 mm
Aluminium
1,00 kg
7 / 8
Advertisement
Table of Contents
