Samson 3277-5 Mounting And Operating Instructions page 7

Referenced standards, directives and regulations
According to the ignition risk assessment performed in accordance with Clause 5.2 of
ISO 80079-36, the non-electrical actuators do not have their own potential ignition source
even in the rare incident of an operating fault. As a result, they do not fall within the scope of
Directive 2014/34/EU.
Î For connection to the equipotential bonding system, observe the requirements specified in
Clause 6.4 of EN 60079-14 (VDE 0165-1).
The Type 3271 and Type 3277 Actuators are partly completed machinery as defined in the
Machinery Directive 2006/42/EC or the Directive 2008 No. 1597 Supply of Machinery
(Safety) Regulations 2008.
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
− Mounting and operating instructions for the valve on which it is mounted
− Mounting and operating instructions for mounted valve accessories (positioner, solenoid
valve etc.)
− Safety Manual u SH 8310 for use in safety-instrumented systems
− u AB 0100 for tools, tightening torques and lubricant
EB 8310-1 EN
Safety instructions and measures
1-3