Dynamic (Cable) - D-Link EBR-2310 User Manual

Section 3 - Configuration
Dynamic IP
Choose Dynamic IP Address to obtain IP Address
Address:
information automatically from your ISP. Select this option
if your ISP does not give you any IP numbers to use.This
option is commonly used for Cable modem services.
Host Name:
The Host Name is optional but may be required by some
ISPs. The default host name is the device name of the
Router and may be changed.
MAC Address:
The default MAC Address is set to the WAN's physical
interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address
unless required by your ISP.
Clone MAC
Address:
The default MAC address is set to the WAN's physical
interface MAC address on the Broadband Router. You
can use the "Clone MAC Address" button to copy the
MAC address of the Ethernet Card installed by your ISP
and replace the WAN MAC address with the MAC address of the router. It is not recommended that you change the default
MAC address unless required by your ISP.
Primary DNS
Addresses:
Enter the Primary DNS (Domain Name Server) server IP address assigned by your ISP.
Secondary DNS
Address:
This is optional.
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the
default MTU.
D-Link EBR-2310 User Manual
Internet Setup

Dynamic (Cable)

18