Advertisement
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.
•
This equipment is for professional use only.
•
Read all instruction manuals, tags, and labels before operating the equipment.
•
Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor.
•
Do not alter or modify this equipment. Use only genuine Graco parts and accessories.
•
Check equipment daily. Repair or replace worn or damaged parts immediately.
•
Do not exceed the maximum working pressure of the lowest rated system component. Refer to the
separate component manuals for the maximum working pressure of this equipment.
•
Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the Techni-
cal Data section of all equipment manuals. Read the fluid and solvent manufacturer's warnings.
•
Route hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose
Graco hoses to temperatures above 82°C (180°F) or below -40°C (-40°F).
•
Wear hearing protection when operating this equipment.
•
Comply with all applicable local, state, and national fire, electrical, and safety regulations.
MOVING PARTS HAZARD
Moving parts can pinch or amputate fingers or other body parts. Pressurized equipment can start acci-
dentally and cause serious injury.
•
Keep clear of moving parts.
•
Do not operate equipment with protective guards or covers removed.
•
Before checking or servicing equipment, follow the Pressure Relief Procedure on page 9. Discon-
nect power or air supply.
•
Do not move or lift pressurized equipment.
309549B
WARNING
Warning
3
Advertisement
