ASROCK PRO Series User Manual page 47

Addressable LED Headers
(3-pin ADDR_LED1) (see p.6, No. 6)
(3-pin ADDR_LED2) (see p.6, No. 20)
These headers are used to connect Addressable LED extension cables which allow users
to choose from various LED lighting effects.
Caution: Never install the Addressable LED cable in the wrong orientation; otherwise,
the cable may be damaged.
Connect your Addressable RGB LED strips
to the Addressable LED Headers (ADDR_
LED1 / ADDR_LED2) on the motherboard.
1. Never install the RGB LED cable in the wrong orientation; otherwise, the cable
may be damaged.
2. Before installing or removing your RGB LED cable, please power off your system
and unplug the power cord from the power supply. Failure to do so may cause dam-
ages to motherboard components.
1. Please note that the RGB LED strips do not come with the package.
2. The RGB LED header supports WS2812B addressable RGB LED strip (5V/Data/
GND), with a maximum power rating of 3A (5V) and length within 2 meters.
44
ADDR_LED1
ADDR_LED2
1
GND
DO_ADDR
VOUT
1