Table of Contents
Advertisement
PROBLEM
DESCRIPTION
• Greenish water.
ALGAE
• Green or black
spots on pool liner.
• Pool liner is
slippery and/or
has a bad odor.
• Water turns blue,
COLORED
brown, or black
WATER
when first treated
with chlorine.
• Water is cloudy or
FLOATING
milky.
MATTER IN
WATER
• Level is lower than
CHRONIC LOW
on previous day.
WATER LEVEL
• Dirt or sand on
SEDIMENT
pool floor.
ON POOL
BOTTOM
• Leaves, insects
SURFACE
etc.
DEBRIS
If you continue to experience difficulty, please contact our Consumer
Service Department for assistance. See back cover for contact
information.
SAVE THESE INSTRUCTIONS
(57) MODEL 603 FILTER PUMP ENGLISH 7.5" X 10.3" PANTONE 295U 11/08/2011
COMMON POOL PROBLEMS
CAUSE
• Chlorine and pH
levels need
adjustment.
• Copper, iron or
manganese in water
being oxidized by
the added chlorine.
This is common.
• "Hard water" caused
by a too high pH level.
• Chlorine content is
low.
• Foreign matter in
water.
• Rip or hole in pool
liner or hoses.
• The drain valves are
loose.
• Heavy use, getting in
and out of pool.
• Pool too close to
trees.
IMPORTANT
English
SOLUTION
• Super chlorinate with shock
treatment. Correct pH to your
pool store's recommended
level.
• Vacuum pool bottom.
• Maintain proper chlorine
level.
• Adjust pH level to the
recommended level.
• Run filter until water is clear.
• Clean cartridge frequently.
• Correct the pH level. Check
with your pool dealer for
advice.
• Adjust the chlorine level.
• Clean or replace your filter.
• Repair with a patch kit.
• Finger tighten all caps.
• Use Intex pool vacuum to
clean bottom of pool.
• Use Intex pool skimmer.
57
Page 10
Advertisement
Table of Contents
