TP-Link TL-WR542G User Manual page 82

Note:
If the above configuration takes effect, to configure to the router by typing
http://192.168.1.1:88
field of the Web browser.
3) Login to the router, click the "Forwarding" menu on the left of your browser, and click the
"Virtual Servers" submenu. On the "Virtual Server" page, click Add New, then on the
"Add or Modify a Virtual Server" page, enter "80" into the blank behind the "Service Port",
and your IP address behind the IP Address, assuming 192.168.1.188 for an example,
remember to "Enable" and "Save".
5. The wireless stations cannot connect to the router.
1) Make sure the "Wireless Router Radio" is enabled.
TL-WR542G
Figure A-7 Remote Management
(the router's LAN IP address: Web Management Port) in the address
Figure A-8 Virtual Servers
Figure A-9 Add or Modify a Virtual server Entry
54Mbps Wireless Router User Guide
73