TP-Link TL-WR542G User Manual page 66

When you want to add or modify an IP & MAC Binding entry, you can click the Add New button
or Modify button, and then you will go to the next page. This page is used for adding or
modifying an IP & MAC Binding entry (shown in Figure 4-46).
To add IP & MAC Binding entries:
1. Click the Add New... button.
2. Enter the MAC Address and IP Address.
3. Select the Bind checkbox.
4. Click the Save button to save it.
To modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click Modify or Delete as desired on the Modify column.
To find an existing entry:
1. Click the Find button (shown in Figure 4-45).
2. Enter the MAC Address or IP Address.
3. Enter the Find button in the next page (shown in Figure 4-47).
TL-WR542G
Figure 4-46 IP & MAC Binding Setting (Add & Modify)
54Mbps Wireless Router User Guide
57