TP-Link TL-WR542G User Manual page 81

Note: Your opposite side should call your WAN IP, which is displayed on the
"Status" page.
4) How to enable DMZ Host: Login to the router, click the "Forwarding" menu on the left of
your browser, and click "DMZ" submenu. On the "DMZ" page, click "Enable" radio and
type your IP address into the "DMZ Host IP Address" field, using 192.168.1.169 as an
example, remember to click the "Save" button.
4. I want to build a WEB Server on the LAN, what should I do?
1) Because the WEB Server port 80 will interfere with the WEB management port 80 on the
router, you must change the WEB management port number to avoid interference.
2) To change the WEB management port number: Login to the router, click the "Security"
menu on the left of your browser, and click "Remote Management" submenu. On the
"Remote Management" page, type a port number except 80, such as 88, into the "Web
Management Port" field. Click "Save" and reboot the router.
TL-WR542G
Figure A-5 Add or Modify a Virtual server Entry
Figure A-6 DMZ
54Mbps Wireless Router User Guide
72