Table of Contents
Advertisement
optimization. There are two types of VLAN as follows:
Port-Based VLAN: Each physical switch port is configured with an access list specifying
membership in a set of VLANs.
ATM VLAN: Using LAN Emulation (LANE) protocol to map Ethernet packets into ATM cells and
deliver them to their destination by converting an Ethernet MAC address into an ATM address.
1)
Assign VLAN PVID for each Interface
Click Assign VLAN PVID for each Interface in Figure 4-26, you can assign the PVID for each
interface in the next screen (shown in Figure 4-27).
PVID: Each physical port has a default VID called PVID (Port VID). PVID is assigned to
untagged frames or priority tagged frames (frames with null (0) VID) received on this port.
TD-W8901GB
54M Wireless ADSL2+ Router User Guide
Figure 4-26
Figure 4-27
34
Advertisement
Table of Contents
