Time Zone - TP-Link TD-8840T User Manual

Note:
1) There is only one account that can access Web-Management interface. The default account
is "admin", and the password is "admin". Admin has read/write access privilege.
2) When you change the password, you should enter the new password twice, and then click
SAVE to make the new password take effect.

4.6.2 Time Zone

Choose "Maintenance→Time Zone", you can configure the system time in the screen (shown in
Figure 4-37).
The system time is the time used by the device for scheduling services. There are three methods
to configure the time. You can manually set the time, specify the PC's Clock as the device' system
time or connect to a NTP (Network Time Protocol) server. If you manually set the time, you may
also set Daylight Saving dates and the system time will automatically adjust on those dates. If a
NTP server is set, you will only need to set the time zone. If PC's Clock is selected, the device will
get the PC's Clock by way of the system time.
1. NTP Server automatically
Select NTP Server automatically as the Synchronize time, you only need to set the time zone.
TD-8840T 4-port ADSL2/2+ Ethernet Router User Guide
Figure 4-37
44