Transportation; Battery - Axis Q8641-E PT Installation Manual

Hide thumbs Also See for Q8641-E PT:
Table of Contents

Advertisement

Transportation

NO TICE
TICE
NO
NO
TICE
• When transporting the Axis product, use the original packaging or equivalent to prevent
damage to the product.

Battery

The Axis product uses a 3.0 V BR2032 lithium battery as the power supply for its internal real-time
clock (RTC). Under normal conditions this battery will last for a minimum of five years.
Low battery power affects the operation of the RTC, causing it to reset at every power-up. When
the battery needs replacing, a log message will appear in the product's server report. For more
information about the server report, see the product´s setup pages or contact Axis support.
The battery should not be replaced unless required, but if the battery does need replacing, contact
Axis support at axis.com/support for assistance.
Lithium coin cell 3.0 V batteries contain 1,2-dimethoxyethane; ethylene glycol dimethyl ether
(EGDME), CAS no. 110-71-4.
WARNING
• Risk of explosion if the battery is incorrectly replaced.
• Replace only with an identical battery or a battery which is recommended by Axis.
• Dispose of used batteries according to local regulations or the battery manufacturer's
instructions.
www.a1securitycameras.com email: sales@a1securitycameras.com
Available from A1 Security Cameras
AXIS Q86 Series
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Q86 seriesQ8642-e pt

Table of Contents