Sin; Sinê() - Texas Instruments TI-NSPIRE Reference Manual

sin()

⇒
Value1 value
sin( )
⇒
List1 list
sin( )
Value1
returns the sine of the argument.
sin( )
List1 returns a list of the sines of all elements in List1.
sin( )
The argument is interpreted as a degree, gradian or radian
Note:
angle, according to the current angle mode. You can use
override the angle mode setting temporarily.
⇒
squareMatrix1 squareMatrix
sin( )
Returns the matrix sine of squareMatrix1. This is not the same as
calculating the sine of each element. For information about the
calculation method, refer to
squareMatrix1 must be diagonalizable. The result always contains
floating-point numbers.
ê
sin ()
⇒
ê
Value1 value
sin ( )
⇒
ê List1 list
sin ( )
ê Value1 returns the angle whose sine is Value1.
sin ( )
ê
List1
returns a list of the inverse sines of each element of
sin ( )
List1.
The result is returned as a degree, gradian or radian angle,
Note:
according to the current angle mode setting.
⇒
ê
squareMatrix1
sin ( )
Returns the matrix inverse sine of squareMatrix1. This is not the
same as calculating the inverse sine of each element. For information
about the calculation method, refer to
squareMatrix1 must be diagonalizable. The result always contains
floating-point numbers.
TI-Nspire™ Reference Guide
ó
.
cos()
squareMatrix
.
cos()
In Degree angle mode:
G
ô
, , or to
In Gradian angle mode:
In Radian angle mode:
In Radian angle mode:
In Degree angle mode:
In Gradian angle mode:
In Radian angle mode:
In Radian angle mode and Rectangular complex format mode:
To see the entire result, press
move the cursor.
m
key
/m
keys
£ ¡ ¢
and then use and to
73