Samsung WAM351 User Manual page 38

When the M3 in use is connected using Wps or the Wi-Fi setup method
`
Connect the HUB to your wireless router with a LAN cable, and then plug the HUB's
1
power cable into an electrical outlet.
Plug in the power cable of the new M3. The new M3's blue LED pairing indicator starts
2
to flash. Wait until the pairing indicator on the M3 stops flashing. When the indicator
stops flashing, pairing is complete. The M3 may also beep.
Turn off the old M3 by disconnecting the power cable. Then, connect it again. Press
3
spK Add
the
starts to flash. Wait until the pairing indicator on the M3 stops flashing.
When the indicator stops flashing, pairing is complete. The M3 may also beep.
On your smart device, select the samsung Multiroom app. Setup starts.
4
button the back of the old M3. The old M3's blue LED pairing indicator
4444 38