Honda CB650RA 2020 Owner's Manual page 88

Engine Oil Changing Engine Oil & Filter
u
Remove the oil filter with a filter wrench
6.
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
Discard the oil and oil filter at an
u
approved recycling center.
Oil filter
Rubber seal
Apply a thin coat of engine oil to the
7.
rubber seal of a new oil filter.
86
Install the new oil filter and tighten.
8.
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m)
Install a new sealing washer onto the
9.
drain bolt. Tighten the drain bolt.
Torque: 22 lbf·ft (30 N·m, 3.1 kgf·m)
Fill the crankcase with the recommended
10.
oil ( P. 72, P. 149) and install the oil fill
2 2
cap/dipstick.
Required oil
When changing oil & engine oil
filter:
2.7 US qt (2.6 L)
When changing oil only:
2.4 US qt (2.3 L)
Check the oil level.
11.
Check that there are no oil leaks.
12.
P. 83
2