Removing & Installing Body Components; Battery - Honda CB650RA 2020 Owner's Manual

Removing & Installing Body Components

Battery

Rubber
strap
80
Positive
terminal
Negative
terminal
Battery
#
Removal
Make sure the ignition switch is in the OFF
position.
Remove the front seat.
1.
Remove the rubber strap.
2.
Disconnect the negative - terminal from
3.
the battery.
Disconnect the positive + terminal from the
4.
battery.
Remove the battery taking care not to
5.
drop the terminal nuts.
#
Installation
Install the parts in the reverse order of removal.
Always connect the positive + terminal first.
Make sure that bolts and nuts are tight.
Make sure the clock information is correct
after the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
P. 81
2
P. 31
2
P. 69
2
P. 120
2