Honda CB650RA 2020 Owner's Manual page 117

Installation
Attach the side collars to the wheel.
1.
On the right side, place the wheel
2.
between the fork legs and insert the
lightly greased front axle shaft to the end,
through the right fork leg and wheel hub.
Align the end of the front axle shaft with
3.
the surface of the fork leg.
Surface of fork
leg
End of front
axle shaft
Tighten the right axle pinch bolts to hold
4.
the axle.
Tire Puncture
Tighten the axle bolt.
5.
Torque: 44 lbf·ft (59 N·m, 6.0 kgf·m).
Loosen the right axle pinch bolts.
6.
Tighten the left axle pinch bolts.
7.
Torque: 16 lbf·ft (22 N·m, 2.2 kgf·m).
Secure the wheel speed sensor wire with
8.
the clamp.
Wheel speed sensor wire
Removing Wheels
u
Clamp
Continued
115