Table of Contents
Advertisement
a) Place the scooter in a vertical position on the stand.
b) Unscrew the fixing screw «A» and remove the cover.
c) Remove the expansion tank cover "B", turning in anticlockwise direction.
d) Look inside the expansion tank; a scale in the plastic indicates the maximum and
minimum level of the coolant.
e) Top up the cooling fluid if the fluid level is below the minimum level margin inside
the expansion tank.
The fluid level must always be between MIN and MAX level
03_13
If the fluid is near the minimum level, proceed with the top-up operation to be carried
out when the engine is cold. If it is necessary to top up the coolant frequently, or if the
expansion tank is completely dry, you should look for the cause in the cooling system.
It is therefore essential to have the cooling system checked at an Authorised Service
Centre.
Replace coolant as indicated in the scheduled maintenance table.
Take your vehicle to an Authorised Service Centre for this operation.
CAUTION
03_14
THE RECOMMENDED COOLANT MUST BE USED FOR TOP-UPS TO AVOID
DAMAGING THE ENGINE.
N.B.
IF DURING A NON-DEMANDING RIDE THE COOLANT WARNING LIGHT COMES
ON, SHUT OFF THE ENGINE AND ALLOW IT TO COOL DOWN. THEN CHECK
THE COOLANT LEVEL; IF THE LEVEL IS NOT CORRECT, CONTACT AN AU-
THORISED SERVICE CENTRE.
45
Advertisement
Table of Contents
