Seat Instructions
FIG. 11: Securely fasten the seat belt before operating
the machine. Always remain seated and have the seat
belt fastened while operating the machine. Replace the
seat belts when they become worn or broken.
Never wear a seat belt loosely or with slack in the belt
system. Never wear the seat belt in a twisted condition or
pinched between the seat structural members.
FIG. 12: When using the instructor seat (1), securely
fasten the seat belt (2). The instructor seat is to be used
only to train new operators or diagnose a problem. The
instructor seat is only intended for short periods of use.
Extra riders, especially children, are not permitted on the
machine.
When the instructor seat is used the machine must be
driven at a slower speed and on level ground. Avoid quick
starts, stops, and sharp turns. Avoid driving on highways
or public roads.
Shield and Guards
FIG. 13: All shields and guards must be in the correct
operating position and in good condition. Refer to the
Operation section for more information on the shields.
700744638 A Rev.
FIG. 11
1
FIG. 12
FIG. 13
SAFETY
WC1953A
2
Q0708421
71389544C
A-9