Page 2
TO OUR CUSTOMER: ® Congratulations on your selection of a Massey Ferguson Product. We believe you have exercised excellent judgment in the purchase of your Massey Ferguson ® machine. We are most appreciative of your patronage. Your Dealer has performed the pre-delivery service on your new machine.
SAFETY SAFETY Contents Safety Alert Symbol ............................A-3 Safety Messages ............................A-3 Informational Messages ..........................A-3 Safety Signs ..............................A-4 A Word To The Operator ..........................A-4 Operator Manual ............................. A-5 Prepare For Operation ............................ A-6 Operation ................................ A-7 General Information ..........................A-7 PPE (Personal Protection Equipment) .....................
Page 6
SAFETY NOTES 700744111 B Rev. Find manuals at https://best-manuals.com...
SAFETY SAFETY ALERT SYMBOL FIG. 1: The safety alert symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Look for the safety alert symbol both in this manual and on safety signs on this machine. The safety alert symbol will direct your attention to information that involves your safety and the safety of others.
SAFETY SAFETY SIGNS WARNING: DO NOT remove or obscure Danger, Warning or Caution signs. Replace any Danger, Warning or Caution signs that readable missing. Replacement signs are available from your dealer in the event of loss or damage. The actual location of the safety signs is illustrated at the end of this section.
SAFETY Make sure your machine has the correct equipment needed by the local regulations. WARNING: An operator should not use alcohol or drugs which can affect their alertness or coordination. An operator on prescription or 'over the counter' drugs needs medical advice on whether or not they can properly operate machines.
SAFETY PREPARE FOR OPERATION Read and understand all operating instructions and precautions in this manual before operating or servicing the machine. Make sure you know and understand the positions and operations of all controls. Make certain all controls are in neutral and the parking brake is applied before starting the machine.
SAFETY OPERATION General Information FIG. 4: When parking, park the machine and the tractor on a solid level surface. Put all controls in neutral, put the tractor transmission in PARK, and apply the tractor parking brake. Stop the tractor engine and take the key with you.
SAFETY PPE (Personal Protection Equipment) FIG. 6: Wear all personal protective equipment (PPE) and protective clothing issued to you or called for by job conditions and country/local regulations. PPE includes, but is not limited to, equipment to protect eyes, lungs, ears, head, hands and feet when operating, servicing or repairing equipment.
SAFETY FIG. 9: Do not operate the machine with the drive shaft shields open or removed. Entanglement in rotating drive shafts can cause serious injury or death. Stay clear of rotating components. Make sure rotating guards turn freely. WC1941 FIG. 9 Exhaust Warning FIG.
SAFETY Agricultural Chemicals Agricultural chemicals can be very hazardous. Improper use of fertilizer, fungicides, herbicides, insecticides and pesticides can injure people, plants, animals, soil and other people's property. Always read and follow all manufacturers' instructions before opening any chemical container. Even if you think you know the instructions, read and follow instructions each time you use a chemical.
Page 15
SAFETY Be aware of the overall width, length, height, and weight of the equipment. Be careful when transporting the machine on narrow roads and across narrow bridges. Always install the safety transport chain between the implement and the tractor drawbar. •...
SAFETY MAINTENANCE General Information FIG. 14: Before doing any unplugging, lubricating, servicing, cleaning, or adjusting: • Park the machine on a solid level surface. • Disengage the tractor PTO. • Put the tractor transmission in PARK and apply the tractor parking brake. •...
SAFETY FIG. 15: Never service, check or adjust the drive chains or belts while the tractor engine is running. wc1943 FIG. 15 FIG. 16: Do not operate the machine with the drive shafts shields open or removed. Entanglement in rotating drive shafts can cause serious injury or death.
SAFETY If any flame cutting, welding, or arc welding is to be done on the machine or attachments, make sure to clear any crop material or debris from around the area. Make sure the area below the work area is clear of any flammable material as falling molten metal or sparks can ignite the material.
SAFETY Tire Safety FIG. 21: Check tires for cuts, bulges, and correct pressure. Replace worn or damaged tires. When tire service is needed, have a qualified tire mechanic service the tire. Tire changing can be very hazardous and must be done by qualified tire mechanic using proper tools and equipment.
Page 20
SAFETY FIG. 23: Pump shield, 540 RPM PTO D-11634 FIG. 23 FIG. 24: Warning sign Hazard (A) - General safety alert. Avoidance (B) - The machine is only to be operated with a 540 RPM PTO. 5 4 0 700731552 700731552a FIG.
Page 21
SAFETY FIG. 27: Warning sign Hazard (A) - General safety alert. Avoidance (B) - The machine is only to be operated with a 1000 RPM PTO. 700731530a FIG. 27 FIG. 28: Warning sign Hazard (A) - Whole body entanglement hazard, PTO driveline.
Page 22
SAFETY FIG. 31: Warning sign Hazard (A) - Escaping fluid under pressure can penetrate the skin and cause serious injury. Avoidance (B) - See the maintenance manual for proper servicing procedures. Shut off engine, remove key and relieve pressure before performing maintenance or repair work.
Page 23
SAFETY FIG. 35: Row unit parallel linkages U0204391 FIG. 35 FIG. 36: Danger sign Hazard (A) - Crushing/shearing hazard - fingers and hand. Avoidance (B) - Stay clear of this area while engine and machine are operating. 700731546 017877 700731546 FIG.
Page 24
SAFETY FIG. 39: Chemical hoppers, if equipped, Caution sign (1) Pb290014a FIG. 39 FIG. 40: Chemical hopper, Warning sign (1) WAR NING Hazard (A) - Chemical ingestion hazard, lungs - opening the cover. Avoidance (B) - Refer to the Operator Manual and the chemical manufacturer’s instructions.
Page 25
SAFETY FIG. 43: Markers G807020a FIG. 43 FIG. 44: Warning sign Hazard (A) - Whole body crushing hazard - machine drop. Avoidance (B) - Install ram stop before going under the machine. 997855a FIG. 44 FIG. 45: Warning sign Hazard (A) - Whole body crushing hazard - machine drop. Avoidance (B) - Install ram stop before going under the machine.
Page 26
SAFETY FIG. 46: Marker arm 32414 FIG. 46 FIG. 47: Warning sign Hazard (A) - Crushing hazard - row marker drop. Avoidance (B) - Stay clear of area around row marker when engine is running. 700730623 700730623 FIG. 47 FIG. 48: Wing frame (both ends) D-11623 FIG.
SAFETY LOCKUP DEVICES Wheel Cylinders Lockup Channels Installed Position FIG. 50: The planter must be raised all the way. Install the lockup channels (1) on the outer wheel cylinders of the planter main frame. Install the pin (2) on each channel.
Page 29
GENERAL INFORMATION GENERAL INFORMATION Contents General ................................B-3 Serial Number Plate Location ......................... B-3 Machine Identification ............................. B-4 Serial Number Definition (2009 and prior) ...................... B-4 Serial Number Definition (2010 and up) ......................B-5 Intended Use ..............................B-6 Proper Disposal of Waste ..........................B-6 700744111 B Rev.
Page 30
GENERAL INFORMATION NOTES 700744111 B Rev.
Page 31
This as a preview PDF file from best-manuals.com Download full PDF manual at best-manuals.com...