Table of Contents
Advertisement
1.
Use a coin to open the battery compartment on the back of your device. Ensure that the O
ring and all surfaces are clean and dry.
2.
Remove the old battery.
3.
Place the new battery into the battery compartment with the positive side facing up.
4.
Slide the battery gently against the contact plate on the side, ensuring that it does not break
or bend out of place.
5.
When replacing the cover, rotate it carefully counter-clockwise with your thumb in order to
align the threads. The cover should rotate easily at first without having to use force. If you
have to use force right at the start, the threads are misaligned and may be damaged.
6.
Perform the final tightening with a suitably sized coin.
NOTE
NOTE
NOTE
42
The markings on the cover may be left unaligned once the cover has been
tightened. If the old cover is undamaged, it does not need to be replaced.
If the threads of the battery compartment cover are damaged, please send
your device to an authorized Suunto representative for service.
Replace the battery with extreme care to ensure that your Suunto t3 remains
water resistant. Careless battery replacement may void the warranty.
Hide quick links:
Advertisement
Table of Contents
