Pressure Difference Measurement Sub Mode - Suunto Advizor User Manual

• temperature compensation (temperature does not effect the pressure within the specified temperature range)
• a temperature range from -20° to 60°C or -5° to 140°F; and
• a temperature resolution of 1° C or F.
Note: Body Heat will effect temperature when the Wristop Computer is worn on the wrist. To achieve an accurate reading
remove the Wristop Computer from the wrist and allow at least 15-30 minutes before reading the temperature.
To view and use the Barometer function:
Check the Mode Indicator arrow. If the mode arrow is not on BARO, PRESS the [Mode] button until the arrow is directly
below BARO.
In the Barometer mode (Fig. 45):
• Field 1 displays the current temperature.
• Field 2 displays the current absolute atmospheric pressure.
• Field 3 displays the current time.
• The Outer Circumference graphically displays the atmospheric pressure over 100 millibars or 1 inHg where one
complete circle is equivalent to 100 mbar/1 inHg, depending on the unit of measure chosen.
Note: The absolute pressure is the actual pressure in any location at any given time. Whereas, sea level pressure is the
corresponding pressure at sea level.
Note: The absolute pressure is depending on current altitude and weather.

5.1 PRESSURE DIFFERENCE MEASUREMENT SUB MODE

The pressure difference is not referring to the sea level pressure, but to the current barometric pressure measured by
the watch.
In the Barometer mode, PRESS the [Select] button once to enter this sub mode.
In the Pressure Difference Measurement sub mode (Fig. 46):
• Field 1 displays the change in temperature.
• Field 2 displays the change in atmospheric pressure.
38