Table of Contents
Advertisement
Message
lights up red in
the display and a
fault code F with
numbers may
appear. An alarm
tone also sounds.
Possible cause and remedy
There is a fault.
Tap on the display to switch the alarm off.
Call Miele.
To report the fault, you need the fault code and also
the model designation and serial number of your
refrigeration appliance. You can access this
information in the display.
To do this touch in the display.
The appliance data required will be shown in the
display.
Confirm with OK to exit the information display and
the fault code will be shown again in the display.
The appliance can be switched off directly from the
fault code display.
There is an appliance fault: this display always has
priority over any settings which have just been
selected.
An appliance fault has priority over any current door
and/or temperature alarms in the display.
Problem solving guide
65
Advertisement
Table of Contents
