Table of Contents
Advertisement
Problem solving guide
Message
lights up red in the
display and an alarm
also sounds.
64
Possible cause and remedy
There is a power cut: The temperature in the
appliance over the last few days or hours has risen
too high because of a power cut or an interruption to
the power supply.
Tap
.
The fault message is confirmed:
goes out and the alarm will stop.
The warmest temperature recorded in the
refrigeration appliance will flash for about 1 minute in
the display. Then the temperature display will change
to the current temperature.
You can exit the flashing temperature display early:
Touch the temperature display.
The warmest temperature display will disappear. The
display will revert to showing the current
temperature. The appliance will operate at the last
temperature setting when the power is restored.
Rectify the cause of the alarm.
Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. Defrosted food
may only be refrozen after it has been cooked.
Advertisement
Table of Contents
