Vga Enable/Disable; Alarm Reset - Supermicro X6DHT-G User Manual

X6DHT-G User's Manual

VGA Enable/Disable

JPG1 enables or disables the VGA Con-
nector on the motherboard. See the table
on the right for jumper settings. The de-
fault setting is enabled.

Alarm Reset

The system will notify you in the event of
a power supply failure. This feature as-
sumes that Supermicro redundant power
supply units are installed in the chassis.
If you only have a single power supply
installed, you should not connect anything
to this jumper to prevent false alarms. See
the table on the right for jumper settings.
VGA Enable
LAN1
LAN2
SMBus
JPW1
P W R
WOL
2-24
VGA
Enable/Disable
Jumper Settings
(JPG1)
Jumper
Position Definition
Pins 1-2 Enabled
Pins 2-3 Disabled
Alarm Reset Jumper
Settings
(JAR)
Jumper
Position Definition
2
1 Ground
Alarm Reset
12V 8-pin
P W R
PSF
OH
LED
JPS1
JWOR
JL1
+5V