McCulloch Rider 11 Workshop Manual page 40

Reparation instructions
4
Remove the transmission cover.
5
Follow the hydrostatic transmission wire backwards
towards the transmission and cut off the cable ties
round the wire.
6
Remove the lock spring at the transmission wire's
rear linkage. Release the clamp holding the wire's
casing.
38
– English
7
Lift off the linkage and pull out the wire.
8
Lift out the transmission wire with the linkage
attached.
9
Unscrew both ball joints from the hydrostatic
transmission wire.
10
Remove the entire hydrostatic transmission wire.