Quickstart; Before You Start; About This Quickstart - Parker AC70 Product Manual

QUICKSTART

BEFORE YOU START

This document covers the steps necessary for a basic start up of the AC30 series drives. Drive start ups
should be performed by competent electrical technicians who are familiar with AC drives and their
applications. For detailed installation, safety and applications refer to the AC30 series Product Manual
HA501718U002.
Ensure that all local electric codes are met while installing the drive. Check that all live parts are covered to
protect against electric shock and that unexpected rotation of the motor will not result in bodily harm or injury.
This document expects that the drive is already installed in its intended location and that all relevant
installation procedures have been followed. Please ensure that the drive has adequate ventilation so that
ambient temperature does not exceed 45
We suggest you check to see if any new firmware is available at www.parker.com/ssd/pdq

ABOUT THIS QUICKSTART

This QuickStart will:



*
Because the AC30 is a system product and we have no knowledge of your application, we detail the
quickest way to power-up the drive using a simple earthing scheme with minimal control wiring. Refer to
the full AC30 series Product Manual HA501718U002 for items not covered in this QuickStart.
Provided with every AC30 unit is:



This QuickStart assumes that:





Safety Note – Use of the STO feature requires full compliance with the STO Chapter 6 of the AC30 series Product
Manual to which the user must first refer.
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - info@sdsdrives.com
Familiarise you with the terminals and operation of the unit.
*
Provide basic installation details and a quick set-up procedure.
Show you how to Autotune the drive and start the motor.
Quickstart.
GKP (Graphical Keypad) for local or remote fitting refer to AC30 series Product Manual
HA501718U002.
Customer ordered Options.
You are a competent technician with experience of installing this type of equipment.
You are familiar with the relevant standards and Local Electric Codes (which take
precedence).
You have read and understood the Safety Information provided at the front of this QuickStart.
You realise that this guide contains only basic information and that you may need to refer to
the AC30 series Product Manual, available from www.parker.com/ssd, to complete your
installation.
You are not using the Safe Torque Off (STO) feature of this product and that you will disable
it as instructed in this QuickStart manual (see page 1-4).
o o
C (112 F) under normal operating conditions.
1-3
English