Verizon ASK-NCQ1338E User Manual page 106

Hide thumbs Also See for ASK-NCQ1338E:
Table of Contents

Advertisement

Action
Action – contains an Edit
generates the next level configuration page for the
specific network connection or network device.
IP Address Distribution
IP Address Distribution
The IP Address Distribution
IP Address Distribution section is used to configure
the Dynamic Host Configuration Protocol (DHCP) server
parameters of your Verizon Internet Gateway for Business.
Once enabled and configured, the DHCP server
automatically assigns IP addresses to any network
devices which are set to obtain their IP address
dynamically.
If DHCP Server is enabled on your Gateway, configure
the network devices as DHCP Clients. There are 2 basic
options in this section: Disabled
To set up the Gateway's network bridge to function as a
DHCP server:
1.
In the IP Address Distribution
DHCP server. Once enabled, the DHCP server
DHCP server
provides automatic IP assignments (also referred to
as IP leases) based on the preset IP range defined
below.
http://setup.verizon.com/businessinternetgateway |
IP Address Distribution section, select the
Start IP Address – Enter the first IP address in
Start IP Address
the IP range that the Gateway will automatically
begin assigning IP addresses from. Since your
Gateway's IP address is 192.168.0.1, the default
Start IP Address is 192.168.0.2.
Edit hyperlink that, when clicked,
Disabled and DHCP Server
DHCP Server.
©2022 Verizon. All Rights Reserved
05 / CONFIGURING
ADVANCED SETTINGS
106

Advertisement

Table of Contents
loading

Table of Contents