Table of Contents
Advertisement
Section 3 - Configuration
WPA Mode:
When WPA-Enterprise is selected, you must also
select a WPA mode from the drop-down menu:
AUTO (WPA or WPA2) or WPA2 Only or WPA3 only.
Cipher Type:
When WPA-Enterprise is selected, you must also
select a cipher type from the drop-down menu:
Auto, AES, or TKIP.
Group Key Update
Select the interval during which the group key
Interval:
will be valid. 3600 is the recommended value as
a lower interval may reduce data transfer rates.
RADIUS Server:
Enter the IP address of the RADIUS server to be
used in authenticate.
RADIUS Port:
Enter the RADIUS port.
RADIUS Secret:
Enter the shared secret to be used between the
radius server and the DAP to authenticate.
Accounting Mode:
Click the drop-down menu to enable or disable
the accounting mode.
Accounting Server:
Enter the IP address of the accounting server.
Accounting Port:
Enter the accounting port.
Accounting Secret:
Enter the accounting secret.
Save:
Save the updated configuration. Click
Configuration > Save and Activate to make
changes permanent.
D-Link DAP-X2810 User Manual
19
Advertisement
Table of Contents
