Honda CB125F 2017 Owner's Manual page 92

Tyre Puncture Removing Wheels
u
# Rear Wheel
Removal
Support your motorcycle securely and
1.
raise the rear wheel off the ground using
the centre stand or a hoist.
Remove the rear brake adjusting nut.
2.
Disconnect the brake rod from the brake
3.
arm.
Disconnect the brake stopper arm from
4.
the brake panel by removing the cotter
pin, stopper arm nut, washer and rubber
grommet.
Loosen the drive chain lock nuts and drive
5.
chain adjusting nuts on both sides of the
swingarm.
Remove the rear axle nut while holding
6.
the rear axle shaft at the other end with a
wrench.
88
Drive chain Drive chain
lock nut adjusting nut
Brake arm
Rear brake
adjusting nut
Stopper arm nut
Rear axle nut
Rear axle
washer
Brake
rod
Brake
stopper
arm
Cotter pin