Removing & Installing Body Components; Battery - Honda CB125F 2017 Owner's Manual

Removing & Installing Body Components

Battery

Negative terminal
Battery
52
Positive terminal
Bolt
Battery holder
# Removal
Make sure the ignition switch is in the
(Off) position.
Remove the left side cover.
1.
Remove the bolt.
2.
Remove the battery holder.
3.
Disconnect the negative - terminal from
4.
the battery.
Disconnect the positive + terminal from
5.
the battery.
Remove the battery taking care not to
6.
drop the terminal nuts.
#
Installation
Install the parts in the reverse order of
removal. Always connect the positive +
terminal first. Make sure that bolts and nuts
are tight.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
2
P. 55
2
P. 42
2
P. 91