Offset Mode Sign - Asus P8Z77-V User Manual

iGPU Current Capability [100%]
Allows you to set the iGPU Current Capability.
Configuration options: [100%] [110%] [120%] [130%] [140%]
Do not remove the thermal module while changing the DIGI+ VRM related parrameters .
The thermal conditions should be monitored.
Some of the following items are adjusted by typing the desired values using the numeric
keypad and press the <Enter> key. You can also use the <+> and <-> keys to adjust the
value. To restore the default setting, type [auto] using the keyboard and press the <Enter>
key.
DRAM Current Capability [Auto]
A higher value brings a wider total power range, and extends the overclocking range
simultaneously.
Configuration options: [100%] [110%] [120%] [130%]
DRAM Voltage Frequency [Auto]
Allows you to adjust the DRAM switching frequency. Assign a fixed high DRAM frequency to
increase the O.C. range, or a low DRAM frequency for a better system stability.
Configuration options: [Auto] [Manual]
DRAM Power Phase Control [Auto]
[Auto]
[Optimized]
[Extreme]
DRAM Power Thermal Control [110]
A higher temperature brings a wider DRAM power thermal range, and extends the
overclocking tolerance to enlarge the O.C. potential. Use the <+> and <-> keys to adjust the
value. The values range from 110 to 131.
DO NOT remove the thermal module. The thermal conditions must be monitored.
CPU Voltage [Offset Mode]
[Manual Mode]
[Offset Mode]

Offset Mode Sign [+]

This item appears only when you set the CPU Voltage item to [Offset Mode].
[+]
[–]
CPU Offset Voltage [Auto]
This item appears only when you set the CPU Voltage item to [Offset Mode] and
allows you to set the Offset voltage. The values range from 0.005V to 0.635V with a
0.005V interval
3-12
Allows you to set the Auto mode.
Allows you to set the ASUS optimized phase tuning profile.
Allows you to set the full phase mode.
Allows you to set a fixed CPU voltage.
Allows you to set the Offset voltage.
To offset the voltage by a positive value.
To offset the voltage by a negative value.
.
Chapter 3: BIOS setup