English - Milwaukee HEAVY DUTY M12CH-402C Original Instructions Manual

TECHNICAL DATA
Cordless Rotary Hammer
Production code
Drilling capacity in concrete
Drilling capacity in steel
Drilling capacity in wood
No-load speed
Rate of percussion under load max.
Impact energy per stroke according to EPTA-Procedure 05/2009
Chuck neck diameter
Torque max. (with battery Li-lon 1,5 Ah)*
Torque max. (with battery Li-lon 3,0 Ah)*
Battery voltage
Weight according EPTA-Procedure 01/2003 (Li-lon 1,5 Ah / Li-lon 3,0 Ah)
Noise information
GB
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Vibration emission value a
Hammer-drilling into concrete
Uncertainty K=
* Measured according to Milwaukee norm N 877318
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for di erent applications, with
di erent accessories or poorly maintained, the vibration emission may di er. This may signi cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is running
but not actually doing the job. This may signi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the e ects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, re and/or serious injury. Save all warnings and instruc-
tions for future reference.
HAMMER SAFETY WARNINGS
Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of
control can cause personal injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a "live" wire
may make exposed metal parts of the power tool "live" and could
give the operator an electric shock.

English

8
h, HD
Additional Safety and Working Instructions
Use protective equipment. Always wear safety glasses when working
with the machine. The use of protective clothing is recommended,
such as dust mask, protective gloves, sturdy non-slip footwear,
helmet and ear defenders.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Do not machine any materials that present a danger to health (e.g.
asbestos).
When working in walls ceiling, or oor, take care to avoid electric
cables and gas or waterpipes.
Clamp your workpiece with a clamping device. Unclamped workpie-
ces can cause severe injury and damage.
M12 H
4313 41 03...
... 000001-999999
13 mm
8 mm
10 mm
0 - 800 min
-1
0 - 5350 min
-1
0,9 J
43 mm
32 Nm
40 Nm
12 V
1,6 / 1,8 kg
81,5 dB (A)
92,5 dB (A)
6,7 m/s
2
1,5 m/s
2