Miele G 5310 Operating Instructions Manual page 69

Inserting the upper spray arm
 Refit the upper spray arm and tighten
it by hand.
Inserting the middle spray arm
 Replace the middle spray arm and
turn the screw thread anticlockwise
until it engages. Make sure that the
recesses in the lock line up.
Inserting the lower spray arm
 Refit the lower spray arm and ensure
that the filter combination lies flat in
the base of the wash cabinet.
Cleaning and care
 Rotate the screw thread of the lower
spray arm clockwise until the arrow in
the viewing window points to the lock
symbol .
 Make sure the spray arms can rotate
freely.

Damage due to soiling entering
the circulation system.
The lower spray arm is used to se-
cure the filter combination. Without
filters, coarse soiling can enter the
circulation system and cause a
blockage.
Do not run a wash programme
without the lower spray arm or
without the filters.
Inserting the cutlery tray (if present)
 Slide the cutlery tray back onto the
rails from the front.
 Replace the safety clips in the rails on
both sides of the cutlery tray.
69