Melitta Caffeo Lattea F300-100 Operating Instructions Manual page 75

15 Thoroughly rinse the water tank, fill it to the max. mark with fresh tap
water.
16 Press the button for coffee strength
descaling programme.
→ Water flows in multiple intervals out of the milk shower into the coffee
grounds container. The symbol for the milk shower
process. Subsequently, the symbol for the milk shower
→ Phase 2 is completed.
Phase 3
During Phase 3, three bean symbols
17 Turn the rotary switch for the milk shower anti-clockwise to close the
milk shower.
→ Water flows inside the appliance into the drip tray. Subsequently, the symbol
for the drip tray
18 Empty the drip tray and then reinsert it.
→ The standby symbol
The appliance is ready for operation.
19 Reinsert the Melitta
72
Heft_Lattea_EU_2_3.indd 72
illuminates.
is illuminated after a brief heat-up phase.
Claris water filter into the water tank.
® ®
to continue with the integrated
flashes during this
illuminates.
are shown on the display.
09.04.2014 14:04:23