Sharp XE-A407 Instruction Manual page 21

Example
PLU/sub-department (open price) entries
For another merchandise classification, the register provides a maximum of 7000* PLUs/sub-departments.
PLUs are used to call up preset prices by a code entry. Sub-departments are used to classify merchandise
into smaller groups under the departments. Every PLU and sub-department has a free code from 1 to 99999,
and should belong to a department to obtain attributes of that department.
The register is pre-programmed to "PRESET" for entry type and zero (0) for unit price. To use PLU entries,
their preset unit prices should be previously programmed. (Refer to the section "PLU/UPC" of "DEPT/PLU
Programming" )
To use sub-department entries, change to "OPEN" or "OPEN&PRESET" entry type for each PLU code.
* A total of 7000 codes, including UPC codes, can be programmed.
Enter a PLU code and press the
unit price after pressing the
Procedure
PLU code
(1 to 99999)
When those PLUs for which the unit price has been programmed as zero (0) are entered, only
NOTE
the sales quantity is added.
Example
Sub-department
entry
Key operation
1200
3 d
A
A
p key. If you not use a programmed unit price, you need to enter a
p key.
p
Key operation
PLU entry
p
2
16 p
A
A
6
5
520
4
When using a programmed unit price
Unit price *
(max. 8 digits)
In case only preset price entry is allowed
1200
Print
A
Print
19