Optional Parts - Fujitsu AU A30LBLU Series Design & Technical Manual

13.

OPTIONAL PARTS

Exterior
( x 1 )
( x 1 )
Parts name
Wired remote
controller
IR Receiver kit
Air outlet
shutter plate
Wide panel
Panel spacer
Insulation kit
for high humidity
External
connect kit
( x 2 )
External
control set
( x 2 )
- (01 - 33) -
Model No.
Unit control is performed by wired
remote controller.
Wired remote controller is
UTB-  UD
attached in one as accessories.
Wired remote controller is two
installation possibility in one
indoor unit.
Unit control is performed by
UTY-LRH  A1
wireless remote controller
Air outlet shutter plate is
UTR-YDZC
installed at the air outlet when
3-way direction is performed.
Wide panel hides the gap
UTG-AGYA-W
between the ceiling hole and
the Decoration panel.
Installation in a space of 256mm
or greater is possible by using
panel spacer when the height
UTG-BGYA-W
behind the ceiling is low.
(Normal behind the ceiling
installation height is 298mm.)
Install when the under roof
condition is expected to be the
UTZ-KXGA
humidity of over 80% and the
temperature of over 30 °C
Use to connect with various
UTY-XWZX
peripheral devices and air
conditioner PC board.
Use to connect with various
peripheral devices and air
UTD-ECS5A
conditioner PC board.
(Set of 6)
Summary