Sony VAIO PCV-RX790G User Manual page 43

Capturing digital video
1 Plug an i.LINK® cable (optional) into the i.LINK port on your computer and
the i.LINK port on a compatible digital video (DV) device.
2 Turn on your compatible DV camera, insert a videotape, and set the camera
to recording mode. On some camera models this is called VCR or VTR
mode.
3 On your computer, click Start, click All Programs, point to MovieShaker,
and click MovieShaker. The MovieShaker software starts.
4 In MovieShaker, click the
5 In MovieShaker, click the Play button.
Video from the videotape plays in the monitor window. If necessary, use the
control buttons at the bottom of the Capture panel to rewind or fast-forward
the videotape in your camera to reach the video clip you want to capture.
6 When the video reaches the point at which you want to start capturing video,
click Capture.
7 When the video reaches the end of the clip you want to capture, click Stop
Capture.
When capturing is completed, a dialog box appears displaying the progress
of importing the video clip.
When importing is completed, the imported clip appears in the Clip tray at
the left of the MovieShaker window.
Use the control buttons at the bottom of the Capture panel to rewind and
fast-forward the videotape in your camera to reach each clip you want to capture.
Repeat steps 5 through 7, to capture and import each clip to the Clip tray.
(Capture) tab.
MovieShaker Software
43