Maintaining And Transporting The Projector; Projector Maintenance; Cleaning The Projection Window - Epson EH-LS650B User Manual

Maintaining and Transporting the Projector

Follow the instructions in these sections to maintain your projector and transport it from place to place.

Projector Maintenance

Air Filter and Vent Maintenance
Replacing the Remote Control Batteries
Transporting the Projector
Projector Maintenance
Your projector needs little maintenance to keep working at its best.
You may need to clean the projection window and motion sensor periodically, and clean the air filter and
air vents to prevent the projector from overheating due to blocked ventilation.
The only parts you should replace are the air filter and remote control batteries. If any other part needs
replacing, contact Epson or an authorized Epson servicer.
This projector uses a sealed laser light source which does not need servicing and cannot be replaced.
Warning: Before cleaning any part of the projector, turn it off, unplug the power cord, and let it cool
down. Never open any cover on the projector, except as specifically explained in this manual.
Dangerous electrical voltages in the projector can injure you severely.
Warning: Do not try to service this product yourself, except as specifically explained in this manual.
Refer all other servicing to Epson qualified servicers.

Cleaning the Projection Window

Cleaning the Motion Sensor
Cleaning the Projector Case
Parent topic:
Cleaning the Projection Window
Clean the projection window periodically, or whenever you notice dust or smudges on the surface.
Warning: Before cleaning the projection window, turn off the projector and unplug the power cord.
Maintaining and Transporting the Projector
83