Activating Wi-Fi On The Appliance; Deactivating Wi-Fi On The Appliance; Resetting The Appliance Network Settings; Remote Start - Bosch WAV28KH0GC User Manual And Installation Instructions

en Home Connect
16.3 Activating Wi-Fi on the
appliance
Note: When Wi-Fi is activated, the en-
ergy consumption increases in com-
parison to the values specified in the
consumption value table.
Press and hold Remote Start
1.
approx. 3 seconds.
Set the programme to position 4.
2.
a The display shows Con.
Press Start / Reload
3.
until the display shows On.
a Wi-Fi is activated.
Note: If Wi-Fi is activated, the appli-
ance will not switch itself off automat-
ically.
16.4 Deactivating Wi-Fi on the
appliance
Press and hold Remote Start
1.
at least three seconds.
Set the programme to position 4.
2.
a The display shows Con.
Press Start / Reload
3.
until the display shows OFF.
a Wi-Fi is deactivated.
Note: The connection is automatically
re-established when the Wi-Fi is
switched back on.
16.5 Resetting the appliance
network settings
Press and hold Remote Start
1.
at least 3 seconds.
Set the programme to position 5.
2.
a The display shows rES.
Press Start / Reload
3.
a The display shows YES.
Press Start / Reload
4.
a The network settings are reset.
36
a If End is shown on the display, the
for
repeatedly
for
repeatedly
a Remote Start
a Remote Start
for
.
.
network settings are reset.
16.6 Remote start
Enable the appliance for remote start
via the Home Connect app.
Note
Remote start is deactivated for safety
reasons in the following
circumstances:
¡ The appliance door is opened.
¡ Start / Reload
¡ Remote Start
¡ The appliance is switched off.
¡ Following a power cut.
Activating remote start
Requirements
¡ The appliance is connected to your
home WiFi network.
¡ The appliance is connected to the
Home Connect app.
¡ A programme is selected.
¡ The appliance door is closed.
¡ The detergent drawer has been
pushed in.
Press Remote Start .
▶
appliance is enabled for remote
start via the Home Connect app.
Deactivating remote start
Press Remote Start .
▶
16.7 Remote diagnostics
Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the Home Con-
is pressed.
is pressed.
lights up and the
goes out.