Hoover H-DRY 300 Manual page 52

In cases where the dryer is
l
installed on top of a washing
machine, a suitable stacking kit
must be used according to the
configuration of your appliance:
− Stacking kit "standard size":
for washing machine with
minimum depth of 44 cm;
− Stacking kit "slim size": for
washing
minimum depth of 40 cm.
− Universal stacking kit with
sliding: for washing machine
with minimum depth of
47 cm.
The stacking
obtainable from service. The
instructions for installation and
any fixing attachments,
provided with the stacking kit.
NEVER install the dryer up
l
near curtains.
The appliance must not be
l
installed behind a lockable door,
a sliding door or a door with a
hinge on the opposite side to
that of the tumble dryer, in
such way that a full opening of
the tumble dryer door is restricted.
For your safety, the appliance
l
must be correctly installed. If
there is any doubt about installation,
call Service for advice.
machine with
kit shall be
are
Once the machine is in place
l
the feet should be adjusted to
ensure that the machine is
level.
Electrical
safety instructions
The technical details (supply
l
voltage and power input) are
indicated on the product rating
plate.
Make sure that the electrical
l
system is earthed, complies
with all applicable law and that
the (electricity)
compatible with the plug of the
appliance.
qualified professional assistance.
WARNING
The appliance must not be
supplied through an external
switching device, such as a
timer, or connected to a circuit
that is regularly switched on
and off by a utility.
52
connections
socket
Otherwise,
and
is
seek