Operating Instructions; Operating Control Panel - Napoleon Element NEFB36H-BS-1 Installation And Operation Manual

5.0 operating instructions

EN
WARNING
!
• Ensure the house circuit breakers for the circuit supply are turned on. When initially connecting the appliance to
a power source, the appliance will make a beeping sound to indicate standby mode.
Once the appliance has been plugged into a grounded electrical outlet or hard-wired to a dedicated
5.1

operating control panel

Power
Temperature
Control
Heater
Top
Light
Flame
20
W415-3155 / B / 07.06.23
120V or 240V power supply, it is ready to operate.
Turns the appliance on / off.
Controls the appliance temperature.
11 Settings:
°C 18 19 20
°F 64 66 68
NOTE: When setting is °C or °F, the temperature control is OFF. Holding the button
for 5s will switch the temperature from °C to °F and vice versa.
Turns the heater and blower on / off.
3 Settings:
H0 - Heater and blower off
bL - Blower on
H1 - Heater on
NOTE: Heater function can be disabled / enabled by holding the button for 5s.
When the heater function is disabled, "LO" will be displayed.
Controls the top light colour.
8 Settings:
d1 - Yellow, red, and blue
d2 - Red and blue
d3 - Yellow and blue
d4 - Yellow and red
d5 - Blue
d6 - Red
d7 - Yellow
d0 - Off
Controls the flame brightness.
5 Settings:
F0 - Flame off
F1 - Small flame
F2 - Medium flame
F3 - Bright flame
F4 - Brightest flame
21 22 23 24 25 26
70 72 74 76 78 80
27
82