Table of Contents
Advertisement
3.1.2
OSD function introduction
1.
Gaming
•
Overclocking:
*
*
Overclocking may cause screen flickering. To reduce such effects,
disconnect the HDMI cable or DisplayPort cable and use the monitor OSD
menu to try again with a safer Max. Refresh rate.
•
Variable OD: Improves the gray level response time of the LCD panel.
The adjusting range is from Level 0 to Level 5.
This function is not available when ELMB is enabled.
•
FreeSync Premium: Allows an Adaptive-Sync supported* graphics
source to dynamically adjust display refresh rate based on typical content
frame rates for power efficient, virtually stutter free and low-latency
display update.
•
•
•
ELMB: ELMB can only be activated when FreeSync Premium
is Off
This function eliminates screen tearing, reduces ghosting and motion blur
when playing games. The function includes 5-level clarity and position
adjustment.
3-2
ASUS TUF GAMING
2560x1440
60Hz
VG32AQA1A
Overclocking
Gaming
Variable OD
FreeSync Premium
Image
ELMB
GamePlus
Color
GameVisual
Shadow Boost
Input Select
MyFavorite
50
ON: This function allows you to adjust the refresh rate.
Max Refresh Rate:
of 170Hz. After selecting, press the
the setting.
FreeSync Premium can only be activated within 48Hz~170Hz for HDMI
and 48Hz~170Hz for DisplayPort.
For supported GPUs, minimum PC system and driver requirements,
please contact the GPU manufactures.
and the refresh rate is 100Hz, 120Hz, 144Hz, 165Hz or 170Hz.
GameVisual
Input Select
Racing Mode
DisplayPort 1
Back
Allows you to select a maximum refresh rate
Chapter 3: General Instructions
Brightness
65
Enter
EXIT
( ) button to activate
Advertisement
Table of Contents
