Advertisement
•
Move the styler downward through the hair section.
•
Repeat this around the head.
•
Let the hair cool before further styling.
CREATE SHAPED ENDS USING THE 25MM BRUSH
•
To curl the ends in, place the brush underneath the section close
to the ends and rotate the styler inwards allowing the hair to wrap
around the barrel and hold for a few seconds.
•
To curl the ends out, place the brush on top of the section close to the
ends and rotate the styler outwards allowing the hair to wrap around
the barrel and hold for a few seconds.
•
Repeat this around the head.
•
Let the hair cool before further styling.
STORAGE, CLEANING AND MAINTENANCE
•
After use, turn the appliance off by moving the temperature control
switch to the O position.
•
Unplug the appliance and allow to cool before cleaning and storing
away.
•
To maintain peak product performance and to prolong motor life, it is
important to regularly remove any dust and dirt from the air filter grille
and clean with a soft brush.
•
To clean the area covered by the grille, twist it in the direction shown
(Fig. C) and slide it down the cable. Clean the inside area then slide
the grille back up the cable and twist it in the opposite direction until
it locks.
•
Don't use harsh or abrasive cleaning agents or solvents.
Advertisement
